#C 41 developing manual
#C 41 developing download

However, it is still important to store the chemistry correctly in airtight bottles and possibly treat it with an anti-oxidation spray such as Tetenal Protectan. Colour (C-41) Film Development (inc Disposables, 110 & APS) Send us your film and well do the rest Receive scans in up to 5 working days and once were. The applicable times are specified in the kit manual. To compensate for the reduced effect of the color developer, the development time must be extended with each successive batch. If several films are developed per batch (2 to 4 films) and the kit is fully used within 7-10 days after opening the bottles, the capacity of the kit will be even greater up to a maximum of 20 35mm films (36 exposures).

With this 1 liter kit 12-15 35mm films (36 exposures) can be developed within a time span of 5 weeks (shelf life of diluted color developer). The total development process therefore only takes about 12-14 minutes (preheating included). In comparison with other kits, the supplied concentrate can be diluted more, so that more than enough working solution can be produced. It is not necessary to rinse the film with water after each step of the development process. Films must be treated 3 to 4 times with this bath to obtain completely clean negatives. With the supplied stabilization concentrate about 1L of working solution can be created. The final bath of the process still remains the stabilizer. The Cs41 development kit from CineStill offers more flexibility in this respect.īecause the bleach and the fixer are divided into two separate baths, they can be applied more quickly one after the other and the processing time is much shorter than when working with a blix (bleach & fix) that can be found in the Tetenal Colortec kits. However, the temperature of the colour developer must still be strictly adhered to during development (38 ☌). For example, the colour developer does not consist of different components that have to be mixed beforehand.

#C 41 developing download

As a result, the kit is much faster to use than the Colortec Kit from Tetenal. Download MP3 About Kodak Flexicolor C-41 developing Mp3: An instructional video on the c-41 process using Kodak Flexicolor chemicals This uses a replenishing routine. The kit consists of a one-piece color developer (hence the name monopart) and a separate bleaching and fixing bath. This development kit is offered at the express request of many customers. The Monopart C-41 Kit offers a number of important advantages compared to the Colortec Kits from Tetenal. Nevertheless, in terms of quality, the kit is certainly not inferior to the development kits of Tetenal and CineStill, which have become well known by now. This kit is mainly aimed at home use or for those who only occasionally develop small batches of film. The C-41 Monopart Color Film Processing Kit from the Italy-based Bellini, is a complete kit for the easy and quick development of color negative films. Contact us if you have any questions about using this kit!

#C 41 developing manual

So max water usage for dev of 2 to 4 films is 3/4 of washing up bowl.A detailed manual of this developing kit can be found under the download section of this product page. When I have finished dev, stop and fix process, I use the water from bowl for my film wash using the Ilford wash routine. The bottles I use are the ones you can see on the Jobo site here: Probably takes no more than 5 seconds even for 1000ml mix. I can then just grab the required bottle, take the top off off and dump its contents into my jobo tank. I don't use the bottles for long term storage, but purely as working solution mixing bottles. I have a set of 600ml bottles and a set of 1000ml bottles. These bottles have wide mouths and pour into my jobo dev tank very fast. So now I have 3 bottles (labeled) in my bowl all ready mixed for use. I then do same for stop and and same for fix. I then float the mixed dev bottle in the bowl of water which acts as a water bath keeping temp correct and constant for more than long enough.

I then take some of what I call my mixing bottles, measure and mix my developer to working strength using water from the bowl into a mixing bottle and put its lid on. When I dev film I 3/4 fill a kitchen washing up bowl with water which is mixed to 1 deg above my developing temp.